Need help for the front camera for golf 7

[Florian13]

Hello to all the friends, I'll need you, I'm having trouble, I'm doing the retrofit of the front camera in the front windshield, I changed my windshield, I connected the beam and the camera, the camera is well recognized by Odis, this during a problem is there, I recopied the long coding and the adaptations of another "golf 7" which owns the same camera that I bought of origin , so everything has been accepted, but I have several errors, the first saying "No basic setting" then I have 2 message saying missing data bus, and the last "Uncoded channel maintenance wizard With the error code "C10ACF2"" and the I do not understand how remedied this, I activated in the gateway in list installation "a5" I then coded in the 5f the "depart lane assist" and in the module 17 I check the bits for the maintenance of way, I do not know if I have forgotten elements, and if anything else I must do something else, I was also here members speaking calibration, they provide a file to print with dimensions, my printer agrees to me out this file the problem in France we need the exact measurements in mm or cm, we just have them figures without knowing anything it is not obvious, or so a file already to the right extent could do the trick, thanks for your help

[Florian13]

Hi, that's not what I'm asking for unfortunately

[diagnoser]

https://www.drive2.ru/l/6482937

[nirvananils]

calibration only work if there`s only one fault like "no basic settings"