Florian13

Hello my friends, I'm coming to you because I have a lot of help, I have a golf 7 of 2014, I'm coming to the retrofit of the Lane Assist, traffic jam, lightassist ... J 'So I the camera, but everything does not go as planned, so I'm going to need you, my camera A5 has this reference "3Q0980654H" I was told that my ACC was not compatible, I had an original ACC MRR1PLUS, so I changed to an ACC MRREVO14F I still have to finish the calibrated and installed the SWAP / FECS ACC HIGH, while I'm back a problem, I am told that my ABS pump may not be compatible, my ABS pump bears this reference "5q0907379CK". I will have 2 questions, firstly do you know if it's easy to change an abs pump? Above all know how to do it for the recoded entirely so that I do not have any problem, I can not find a retrofit tutorial for the abs. Second question, a friend of mine had his abs pump that had this reference "5q0907379AB" he flashed with a first reference nothing more than market, and he tried to flash in M and the whole market perfectly, but I do not want risky without certainty especially if i do not have the flahs file of my original reference to know "5q0907379CK" you can help me eventually find this flash file?

Nobody could help me?

Hello everyone, I have a huge problem, I installed the front camera in my golf 7 I changed the windshield, I coded the camera, I calibrated with OBD 11 and then I I did it again with Odis.S but the calibration in statics is done perfectly well, but on the other hand nothing in dynamic, I rolled well several hours nothing is triggered, do you know what to do is hardened? Or if you know how to trigger it in dynamic? Thank you for answering me, I leave you the recorded data of my calibration

Hi, that's not what I'm asking for unfortunately

Hello to all the friends, I'll need you, I'm having trouble, I'm doing the retrofit of the front camera in the front windshield, I changed my windshield, I connected the beam and the camera, the camera is well recognized by Odis, this during a problem is there, I recopied the long coding and the adaptations of another "golf 7" which owns the same camera that I bought of origin , so everything has been accepted, but I have several errors, the first saying "No basic setting" then I have 2 message saying missing data bus, and the last "Uncoded channel maintenance wizard With the error code "C10ACF2"" and the I do not understand how remedied this, I activated in the gateway in list installation "a5" I then coded in the 5f the "depart lane assist" and in the module 17 I check the bits for the maintenance of way, I do not know if I have forgotten elements, and if anything else I must do something else, I was also here members speaking calibration, they provide a file to print with dimensions, my printer agrees to me out this file the problem in France we need the exact measurements in mm or cm, we just have them figures without knowing anything it is not obvious, or so a file already to the right extent could do the trick, thanks for your help

Nobody to help me?

Hi all, I'm asking you because I'm about to realize the retrofit golf steering wheel 7, I need you a lot because I bought a golf steering wheel 7 with the heating function, I bought a beam at Kelectronics and I learned that I had to change my direction module, because mine is not compatible, I want the steering module compatible with the heating option and the vibrations for the Blindspot that I I added. Thank you for helping me.

Hi; thanks bro by chance, you do not know where I can find the complete beam for this connection?

Exactly, I have a center near my home in Marseille, who will put me the windshield, but they just do the windshield pose nothing else, me to anticipate that, I want to already found the beam for the de-icing function and especially the plugged, like that once ask there will be more to do.

@kindacute, thanks again, my car is a "golf 7 of 2014", 1.2 TSI engine, normally the car is not compatible, but seeing that I did a lot of retrofit on it, all the modules have been replaced by those of golf 7.5 Facelift, so now it's compatbile for the Heated Windshield

@megabyteauto, sorry I did not understand your message at all, I'm asked to translate into English that's what I do, you prefer that I speak in French, it will be more useful for you? @vlasoff Thank you for your sensible answer, unfortunately I do not have Elsawin, then if I have to buy it I will use it for only one use I do not think it will be useful, you understand?

@kvp01 hi bro, just to tell you this is not my request, I will explain again with pictures, the connection of the camera no problem I understood it I even have the beam, the what I ask it is or connect the de-icing function of the front windshield? You see the photos of the wires that's what I ask you friends http://zupimages.net/viewer.php?id=19/18/4vxv.jpg http://zupimages.net/viewer.php?id=19/18/lchr.jpg http://zupimages.net/viewer.php?id=19/18/ycbj.jpg

Hello friends, sorry, it's the translator who translates automatically in Russian, I did not know we could write in English here, as I told you, I need the beam to connect the heating function of the front windshield, I have not found anything, I have a gole 7, I change the windshield to install the front camera, and the windshield a wiring because it is heated, and can not find this beam or know where it connects

Привет, я пытался посмотреть на сайте, который вы мне дали, но я не получил никаких объяснений, никто здесь не может сказать мне, где он подключается и дать мне ссылку на этот луч?

Привет всем, мне понадобится ваша помощь. Я собираюсь добавить переднюю камеру в лобовое стекло, для этого мне нужно поменять лобовое стекло, я купил новый VW оригинал, который имеет функцию обогрева, которая недоступна во Франции, я проверил в модуле моего автомобиля 09 есть линии для размораживания лобового стекла, потому что я не знаю, луч, который соединяется с лобовым стеклом, или знаю или подключить сына в номере, вы можете помочь мне в этом? Моя машина - поле для гольфа 7 спасибо