Перейти к публикации
TUNING FILE DATABASE
  • INNOVATIVE CAR TECHNOLOGIES:
    • Профессиональный чип тюнинг коробок передач DSG S-tronic ZF PDK Aisin
    By *AGV*

    TUNING SOFTWARE FOR HIGH PERFORMANCE

    EASY  POWERFUL

    By *AGV*

    PERFORMANCE SOFTWARE FOR DSG | S-Tronic

    Full reading and writing for TCUS Bosch ZF8HP45, ZF8HP50, ZF8HP90 and Temic DQ250, DQ381 equipped  VAG.

    By *AGV*

    TUNING AUTOMOTIVE PARTS

    Specific Functions

    By *AGV*

    SPARE PARTS GEARBOX DSG / S-Tronic

    SPARE PARTS GEARBOX DSG / S-Tronic

    By *AGV*

    (TCU/TCM) Transmission control unit Repair

    Do you want to have a defective transmission control unit remanufactured? You can submit a remanufacture request quickly and easily via our forums

    ejne

    Новичок
     Профиль  Активность

    • Публикаций

      19

    • Зарегистрирован

    • Посещение

     Тип публикации 

    Все публикации пользователя ejne

    1. ejne
      you have to look on TPI 2039321 it is update for EU version and there is software0330
    2. ejne
      ifyou reflash unit with europe firmware you can install europe maps.
    3. ejne
      when you open project chose last list - special function . there you can reset interval.
    4. ejne
      which camera do you have ( PN ). What parametrisation and from where you flash inside? What flash software did you use?
    5. ejne
      Not possible via flash there is different HW inside. Sent from my ONEPLUS A6000 using Tapatalk
    6. ejne
      If you look closer to hw of each GW from index C ( not C index but higher ) is diferent chips ant other parts of desk than index C and lower. And about drain battery from radio unit you can solve it by flashing GW to other SW. So you willn't have sw 40 after flash. Here is TPI about it it will aolve drain battery from rns510 Odoslané z ONEPLUS A6000 pomocou Tapatalku
    7. ejne
      you cant flash it from index C to higher. there is diferent HW so it is imposible. but if you have problem with drine battery there is one TPI if you follow it you will solve it.
    8. ejne
      Formmatrix youbhave to done it via VAS (special parts machine ) because you need to write sepcific angle. If you just done it via vcds or odis byfollowing procedure it is nothing. That is problem.of high beam Odoslané z ONEPLUS A6000 pomocou Tapatalku
    9. ejne
      Have you done calibration. As it should be in matrix lights ? Odoslané z ONEPLUS A6000 pomocou Tapatalku
    10. ejne
      can anyone help with flash file for 3AA 907 044 climatronic ? but it need to be sw607 . lower version I have but this is missing and I need flash one climatronic thank you
    11. ejne
    12. ejne
      one think you downgrade your unit because as ETKA telling first was software 3C8907441A and it is dropped out from 1.7.2012 and replaced for 3C8907441. dont know why SW go from 140 to 40.
    13. ejne
      I wrote you in first my post what pin si for what. From pin nr.1 to pin nr. 4 Odoslané z ONEPLUS A6000 pomocou Tapatalku
    14. ejne
      what exact you need . just wiring of camera? there is 4pin connector: 1 - release button come to Convenience system central control unit 8pin connector pin nr 6 2 - Earth connection ( ground ) 3 - reversing lighnt 4 - fuse nr 17
    15. ejne
      have you try calculator in last rosstech VCDS? as alternative calculator
    16. ejne
      have you try change cupling?
    17. ejne
      Perfect will be post here autoscan that other member can see which unit have which problem. not only copy name of problem without any other info of car or unit . Just think how many diferent touran in 2009 was maked. not only yours. so post here autoscan from maybe VCDS ....
    18. ejne
      that is diference if you have china version . please post here picture of which camera you have and how you connect it and where. Propably you have something bad in connection of wires
    19. ejne
      do you have original VW ot china version of RCD510. If china version propably you have problem with connection or coding. you don´t need reflash radio
    ×
    ×
    • Создать...