Поделиться с друзьями
MAP Stainless Steel O2 Eliminator Downpipe (Mitsubishi Evo X) External Dump

At MAPerformance our goal is to offer the highest quality products available at a price that anyone can afford. This integrated O2 housing downpipe, or O2 eliminator as they are often referred to, does just that by removing some of the largest restrictions in the factory exhaust system for significant horsepower gains throughout the power band!

Features / Benefits
  • Full 3' design reduces exhaust restrictions
  • Made from 304 stainless steel for superior corrosion resistance and enhanced appearance
  • Mandrel bent tubing throughout optimizes exhaust flow
  • Stainless steel flex section reduces stress from engine movement increasing longevity
  • Optimal wastegate dump location helps eliminate boost creep
  • Includes stainless steel turbo outlet gasket
  • 100% Made in the USA
Available with either the normal stainless steel finish or coated with our advanced ceramic coating. This black ceramic coating increases exhaust velocity and reduces under hood temperatures for improved performance and appearance.

We offer this product with your choice of turbine outlet flange, standard or 3D contoured. The standard flange has been performing flawlessly for the majority of our customers since this product's inception in 2009, but there have been a handful of customers that experienced boost creep when trying to run lower boost levels (less than 25psi) with upgraded turbochargers. In general if you are swapping out your existing o2 housing for this upgraded unit and plan to run 25+ psi you shouldn't have an issue with the standard flange. If, however, you just performed a significant upgrade (complete engine build, turbocharger upgrade, etc.) and would prefer to begin the tuning process below 25psi or if you ultimately plan to run less than 25psi we recommend the 3D contoured option to ensure you have complete boost control.

Warranty Information

At Modern Automotive Performance we strive to offer only the highest quality products and stand behind our work. All MAP brand products will include a one year warranty from the date of purchase. In the event of a failure from a manufacturing defect we will either repair or replace the product at no cost.

Disclaimer This product is intended for off road use only. As sound level and emissions laws vary based on location please consult your local authorities for additional information.

Why Choose MAP Products? If you are looking for some of the best fabrication solutions, or products for your vehicle, Modern Automotive Performance has what you're looking for. Our in house fabricators have over 15 years of experience in the import and fabrication industry, and have made everything from simple brackets, to mass produced products, to all out one-off turbo systems, and utilize only the highest quality of materials, tooling, consumables, and processes to bring our customers the best fabricated products and services available at industry fair prices. Whether you're looking to have a blow off valve flange welded and installed, purchase one of the products in our ever expanding MAP product line, build a fully prepped race car, or anything in between, we have what you're looking for. Whether you have a lightly modded daily driver, a weekend warrior, or a tube chassis race car, the fabricators and staff at MAPerformance will turn your dreams and ideas, into the products and power that no one else can deliver.

What do our customers say?

'+25whp@7000rpm! I am extremely happy with this thing and would recommend it to anyone.' - Chris S.

'This is a beast of a downpipe i will kick the crap out of for years to come without issues for sure.' - Dave S.

NOTE: This will NOT work on right-hand drive applications
Рейтинг: 
Арт.: EVOX-O2E-EXT
Нет в наличии
46 610 руб. / шт
Экономия0 руб. 0%
Нашли дешевле?
Укажите количество
+
Сумма:
Цена действительна только для интернет-магазина и может отличаться от цен в розничных магазинах.
MAP Stainless Steel O2 Eliminator Downpipe (Mitsubishi Evo X) External Dump

At MAPerformance our goal is to offer the highest quality products available at a price that anyone can afford. This integrated O2 housing downpipe, or O2 eliminator as they are often referred to, does just that by removing some of the largest restrictions in the factory exhaust system for significant horsepower gains throughout the power band!

Features / Benefits
  • Full 3' design reduces exhaust restrictions
  • Made from 304 stainless steel for superior corrosion resistance and enhanced appearance
  • Mandrel bent tubing throughout optimizes exhaust flow
  • Stainless steel flex section reduces stress from engine movement increasing longevity
  • Optimal wastegate dump location helps eliminate boost creep
  • Includes stainless steel turbo outlet gasket
  • 100% Made in the USA
Available with either the normal stainless steel finish or coated with our advanced ceramic coating. This black ceramic coating increases exhaust velocity and reduces under hood temperatures for improved performance and appearance.

We offer this product with your choice of turbine outlet flange, standard or 3D contoured. The standard flange has been performing flawlessly for the majority of our customers since this product's inception in 2009, but there have been a handful of customers that experienced boost creep when trying to run lower boost levels (less than 25psi) with upgraded turbochargers. In general if you are swapping out your existing o2 housing for this upgraded unit and plan to run 25+ psi you shouldn't have an issue with the standard flange. If, however, you just performed a significant upgrade (complete engine build, turbocharger upgrade, etc.) and would prefer to begin the tuning process below 25psi or if you ultimately plan to run less than 25psi we recommend the 3D contoured option to ensure you have complete boost control.

Warranty Information

At Modern Automotive Performance we strive to offer only the highest quality products and stand behind our work. All MAP brand products will include a one year warranty from the date of purchase. In the event of a failure from a manufacturing defect we will either repair or replace the product at no cost.

Disclaimer This product is intended for off road use only. As sound level and emissions laws vary based on location please consult your local authorities for additional information.

Why Choose MAP Products? If you are looking for some of the best fabrication solutions, or products for your vehicle, Modern Automotive Performance has what you're looking for. Our in house fabricators have over 15 years of experience in the import and fabrication industry, and have made everything from simple brackets, to mass produced products, to all out one-off turbo systems, and utilize only the highest quality of materials, tooling, consumables, and processes to bring our customers the best fabricated products and services available at industry fair prices. Whether you're looking to have a blow off valve flange welded and installed, purchase one of the products in our ever expanding MAP product line, build a fully prepped race car, or anything in between, we have what you're looking for. Whether you have a lightly modded daily driver, a weekend warrior, or a tube chassis race car, the fabricators and staff at MAPerformance will turn your dreams and ideas, into the products and power that no one else can deliver.

What do our customers say?

'+25whp@7000rpm! I am extremely happy with this thing and would recommend it to anyone.' - Chris S.

'This is a beast of a downpipe i will kick the crap out of for years to come without issues for sure.' - Dave S.

NOTE: This will NOT work on right-hand drive applications
Позвоните нам!
Ваш заказ готов к оформлению
Личный кабинет
Вам будет доступна история заказов, управление рассылками, свои цены и скидки для постоянных клиентов и прочее.
Ваш логин
Ваш пароль
Звони в Telegram GMT+3 (10:00-20:00)
Общие вопросы по работе магазина
Тех. Поддержка
Жалобы и предложения
Сотрудничество
Центральный офис в Москве