Поделиться с друзьями
MAP Stainless Steel O2 Eliminator Downpipe (Evo 8/9)

You have stumbled upon the first of many upcoming product offerings produced by MAPerformance under the MAP brand name. Our goal is to offer the highest quality products available at a price that anyone can afford, and our very first product has done just that! This integrated O2 housing downpipe, or O2 eliminator as they are often referred to, has proven to add 16whp on a stock turbo, stock air intake Evolution at factory boost levels! It is also important to note that these gains were realized on a car that had already upgraded the catback exhaust system and replaced the catalytic converter, arguably the biggest restriction from the factory, with a test pipe! Even larger gains are inevitable on applications with further modifications or increased boost levels!

Features / Benefits
  • Full 3' design reduces exhaust restrictions and is the only true 3' option available!
  • Made from 304 stainless steel for superior corrosion resistance and enhanced appearance.
  • Mandrel bent tubing throughout optimizes exhaust flow.
  • Stainless steel flex section reduces stress from engine movement increasing longevity.
  • Optimal wastegate dump location helps eliminate boost creep.
  • Fits all Evolution 8 & 9 including those equipped with an Active Center Differential (ACD).
  • Includes all necessary gaskets and hardware including spacers to clear the factory crossmember.
  • 100% Made in the USA.
Options External wastegate dump: This is the absolute best option in regards to performance as the wastegate gases never reenter the exhaust system. Please note that under full boost the exhaust will be considerably louder. This option is intended for off road use only as venting exhaust gases prior to a catalytic converter is illegal in most states. Recirculated wastegate dump: Standard O2 housing configurations recirculate the wastegate gases just inches away from the turbine outlet resulting in turbulence and decreased performance. Our unit recirculates the wastegate gases as far away from the turbine outlet as possible to provide you with the best possible performance without the additional noise from the external dump. Test Pipe / High Flow Catalyst: Further increase exhaust flow by adding either a test pipe or high flow catalyst to your purchase. Please note this is a separate component. V-Band Clamp Option

Based on several requests for a two piece configuration we have finally released a v-band version that retains a full 3' diameter throughout! This option is only available with a recirculated wastegate dump.

Flange Options We offer this product with your choice of turbine outlet flange, standard or 3D contoured. The standard flange has been performing flawlessly for the majority of our customers since this product's inception in 2009, but there have been a handful of customers that experienced boost creep when trying to run lower boost levels (less than 25psi) with upgraded turbochargers. In general if you are swapping out your existing o2 housing for this upgraded unit and plan to run 25+ psi you shouldn't have an issue with the standard flange. If, however, you just performed a significant upgrade (complete engine build, turbocharger upgrade, etc.) and would prefer to begin the tuning process below 25psi or if you ultimately plan to run less than 25psi we recommend the 3D contoured option to ensure you have complete boost control.

Warranty Information At Modern Automotive Performance we strive to offer only the highest quality products and stand behind our work. All MAP brand products will include a one year warranty from the date of purchase. In the event of a failure from a manufacturing defect we will either repair or replace the product at no cost.

Independent Reviews EvolutionM.net ~ Review: MAP downpipe

'Also had good experience with this' -- FTY Motorsports on EvoM

'Also had good experience with this' -- italianevo88 on EvoM

'I had the map on my first one and loved it, great group of guys to deal with' -- THE8UH8 on EvoM

'i have the map o2 dump downpipe and love it' -- Guerillah on EvoM

'My research leads me to want the MAP O2 eliminator/Downpipe with 3D inlet. Beautiful piece!' -- blknblubkrdude on EvoM

'map's o2 eliminator is the shiznit!!!' -- bbyevo8u on EvoM

'i have a MAPerformance o2 dump, No complaints here.' -- tim85851 on EvoM

Disclaimer This product is intended for off road use only. As sound level and emissions laws vary based on location please consult your local authorities for additional information.

Why Choose MAP Products? If you are looking for some of the best fabrication solutions, or products for your vehicle, Modern Automotive Performance has what you're looking for. Our in house fabricators have over 15 years of experience in the import and fabrication industry, and have made everything from simple brackets, to mass produced products, to all out one-off turbo systems, and utilize only the highest quality of materials, tooling, consumables, and processes to bring our customers the best fabricated products and services available at industry fair prices. Whether you're looking to have a blow off valve flange welded and installed, purchase one of the products in our ever expanding MAP product line, build a fully prepped race car, or anything in between, we have what you're looking for. Whether you have a lightly modded daily driver, a weekend warrior, or a tube chassis race car, the fabricators and staff at MAPerformance will turn your dreams and ideas, into the products and power that no one else can deliver.



Рейтинг: 
Арт.: EVO-O2E-SS-R
Нет в наличии
65 250 руб. / шт
Экономия0 руб. 0%
Нашли дешевле?
Укажите количество
+
Сумма:
Цена действительна только для интернет-магазина и может отличаться от цен в розничных магазинах.
MAP Stainless Steel O2 Eliminator Downpipe (Evo 8/9)

You have stumbled upon the first of many upcoming product offerings produced by MAPerformance under the MAP brand name. Our goal is to offer the highest quality products available at a price that anyone can afford, and our very first product has done just that! This integrated O2 housing downpipe, or O2 eliminator as they are often referred to, has proven to add 16whp on a stock turbo, stock air intake Evolution at factory boost levels! It is also important to note that these gains were realized on a car that had already upgraded the catback exhaust system and replaced the catalytic converter, arguably the biggest restriction from the factory, with a test pipe! Even larger gains are inevitable on applications with further modifications or increased boost levels!

Features / Benefits
  • Full 3' design reduces exhaust restrictions and is the only true 3' option available!
  • Made from 304 stainless steel for superior corrosion resistance and enhanced appearance.
  • Mandrel bent tubing throughout optimizes exhaust flow.
  • Stainless steel flex section reduces stress from engine movement increasing longevity.
  • Optimal wastegate dump location helps eliminate boost creep.
  • Fits all Evolution 8 & 9 including those equipped with an Active Center Differential (ACD).
  • Includes all necessary gaskets and hardware including spacers to clear the factory crossmember.
  • 100% Made in the USA.
Options External wastegate dump: This is the absolute best option in regards to performance as the wastegate gases never reenter the exhaust system. Please note that under full boost the exhaust will be considerably louder. This option is intended for off road use only as venting exhaust gases prior to a catalytic converter is illegal in most states. Recirculated wastegate dump: Standard O2 housing configurations recirculate the wastegate gases just inches away from the turbine outlet resulting in turbulence and decreased performance. Our unit recirculates the wastegate gases as far away from the turbine outlet as possible to provide you with the best possible performance without the additional noise from the external dump. Test Pipe / High Flow Catalyst: Further increase exhaust flow by adding either a test pipe or high flow catalyst to your purchase. Please note this is a separate component. V-Band Clamp Option

Based on several requests for a two piece configuration we have finally released a v-band version that retains a full 3' diameter throughout! This option is only available with a recirculated wastegate dump.

Flange Options We offer this product with your choice of turbine outlet flange, standard or 3D contoured. The standard flange has been performing flawlessly for the majority of our customers since this product's inception in 2009, but there have been a handful of customers that experienced boost creep when trying to run lower boost levels (less than 25psi) with upgraded turbochargers. In general if you are swapping out your existing o2 housing for this upgraded unit and plan to run 25+ psi you shouldn't have an issue with the standard flange. If, however, you just performed a significant upgrade (complete engine build, turbocharger upgrade, etc.) and would prefer to begin the tuning process below 25psi or if you ultimately plan to run less than 25psi we recommend the 3D contoured option to ensure you have complete boost control.

Warranty Information At Modern Automotive Performance we strive to offer only the highest quality products and stand behind our work. All MAP brand products will include a one year warranty from the date of purchase. In the event of a failure from a manufacturing defect we will either repair or replace the product at no cost.

Independent Reviews EvolutionM.net ~ Review: MAP downpipe

'Also had good experience with this' -- FTY Motorsports on EvoM

'Also had good experience with this' -- italianevo88 on EvoM

'I had the map on my first one and loved it, great group of guys to deal with' -- THE8UH8 on EvoM

'i have the map o2 dump downpipe and love it' -- Guerillah on EvoM

'My research leads me to want the MAP O2 eliminator/Downpipe with 3D inlet. Beautiful piece!' -- blknblubkrdude on EvoM

'map's o2 eliminator is the shiznit!!!' -- bbyevo8u on EvoM

'i have a MAPerformance o2 dump, No complaints here.' -- tim85851 on EvoM

Disclaimer This product is intended for off road use only. As sound level and emissions laws vary based on location please consult your local authorities for additional information.

Why Choose MAP Products? If you are looking for some of the best fabrication solutions, or products for your vehicle, Modern Automotive Performance has what you're looking for. Our in house fabricators have over 15 years of experience in the import and fabrication industry, and have made everything from simple brackets, to mass produced products, to all out one-off turbo systems, and utilize only the highest quality of materials, tooling, consumables, and processes to bring our customers the best fabricated products and services available at industry fair prices. Whether you're looking to have a blow off valve flange welded and installed, purchase one of the products in our ever expanding MAP product line, build a fully prepped race car, or anything in between, we have what you're looking for. Whether you have a lightly modded daily driver, a weekend warrior, or a tube chassis race car, the fabricators and staff at MAPerformance will turn your dreams and ideas, into the products and power that no one else can deliver.



Позвоните нам!
Ваш заказ готов к оформлению
Личный кабинет
Вам будет доступна история заказов, управление рассылками, свои цены и скидки для постоянных клиентов и прочее.
Ваш логин
Ваш пароль
GMT+3 (10:00-20:00)
Общие вопросы по работе магазина
Тех. Поддержка
Жалобы и предложения
Сотрудничество
Центральный офис в Москве